
Chapter | 4 | Major Cleaning |
|
|
|
|
|
|
9.Using a Toraysee cloth (listed on page 68), wipe off the dirt on the discharge LED.
1
Legend:
1)Discharge LED
10.Install the discharge LED.
Cleaning The Photoreceptor Drum
CAUTION When cleaning the photoreceptor drum, observe the following precautions:
•Do not touch the drum surface with your hands.
•To prevent the drum surface from being scratched, clean it in a location free of dust.
•Cleaning the drum may result in wiping stains. A drum left unused in the printer for a long time after cleaning may especially be affected. Therefore, after cleaning and installing the drum in the printer, use maximum size paper to print an image repeatedly until no stains remain. Stains usually clear after printing a few dozen pages.
1.Remove the photoreceptor drum from the printer. (See page 115.)
2.Place the drum on a covered work surface.
98