Error Messages
123
TABLE NOTES:
1. For
any
error with Reprint on Fault enabled: If the printer stops
while in the middle of printing a page, reloading the paper and
reprinting are required. There may be other cases requiring
reloading and reprinting; if so, a message appears.
2. For
any
error with Reprint on Fault disabled: If the printer stops
while in the middle of printing a page, reloading the paper is
required and pages are lost.
3. For error numbers 01, 14, and 15: If the error occurs while
paper is
not
moving, it is not necessary to reload or reprint.
4. For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5. Status message only. No operator action required to clear
message.
K1 File Not Compatible á
K2 Wrong File Checksum á
K3 DC Program Not Valid á
K4 No Flash File System á
K5 DRAM Fail at Address
XXXXXXXX
á
K6 Flash Memory Fail á
K7 Program Flash Fail at
XXXXXXXX
á
K8 Flash Memory Full á
K9 Program Needs More
DRAM
á
L0 Invalid DRAM*/
Configuration
á
Error
Code Error Message Operator
Correctable
Field
Service
Required
Reprint
Required