Chapter 2 Powering On The Printer
5.Turn on the printer by setting the power switch to (on). When you power on the printer, the following occurs:
a.The printer reads the emulation boot file and displays the message:
H0: TEST HARDWARE PLEASE WAIT...
b.The ONLINE indicator lights continuously and STAND BY goes out.
NOTE: The printer can be set to power on in the OFFLINE state instead of the ONLINE state. To print, ONLINE must be lit; if it is not, press ONLINE.
If other messages and prompts appear on the control panel, answer the prompts and follow the directions as explained on page 120.
32
