Cleaning The Fuser Unit Cover Glass
3. Open the waste toner recovery unit.
CAUTION The transfer charger must be in the down position to avoid scratching the drum. Failure to perform steps 4 and 5 damages the drum.
4.Rotate the transfer elevator drive shaft counterclockwise. Watch the charger movement:
a.If the charger starts to move up, it is already in the down position.
b.If the charger starts to move down, continue to rotate the drive shaft until the charger reaches the complete down position.
1 |
2 |
Legend: |
1)Transfer Charger
2)Transfer Elevator Drive Shaft
CAUTION To avoid damaging the printer or causing false paper jams, the transport lever must be in the fully down position before closing the transport unit.
5.Lower the transport surface by turning the green lever on the transport unit to the left.
91
