Proctor-Silex 840150200 manual How to Assemble and Lock the Cover, How to Operate the Controls

840150200 Ev02.qxd 5/15/06 5:12 PM Page 5

How to Assemble and Lock the Cover

Align cover as illustrated by placing thumb on cover tab and twisting cover clockwise. Four visual alignment markers are provided (see illustration), one on bowl, one on handle and two on bowl lid.

NOTE: The food processor will not work unless the cover is locked into position.

Food chute lid hinges onto back of food chute. Push down lid to latch onto food chute.

Before removing lid, switch to OFF (O) position and wait until blade stops rotating.

To remove food chute lid for cleaning, place one hand in food pusher opening and the other on food chute. Rotate hand from left to right and lift up. This will disengage left notch from slot and then right notch from slot. Reverse the directions to place food chute lid back on food chute.

How to Operate the Controls

The control dial is conveniently located on the front of the base. Rotate the knob clockwise to select a speed:

1 and 2 for Low

3 and 4 for High

The processor will run continuously. For instant on and off control, use the PULSE (P) button by rotating knob counterclockwise.

5