9.Attach the Left Pedal (12) to the left Pedal Arm (14) with three M10 x 70mm Button Screws (75), three M10 Split Washers (78), and an M4 x 16mm Screw (84).

Repeat this step for the other side of the elliptical exerciser.

10.Apply a small amount of grease to two Wave Washers (88) and to the axles on a Pedal Arm Axle (21).

Identify an Upper Body Leg Spacer (113), which has a curved side. Slide a Wave Washer (88) and the Upper Body Leg Spacer onto the indi- cated axle of the Pedal Arm Axle (21); make sure that the curved side of the Upper Body Leg Spacer is facing away from the Pedal Arm Axle.

Identify a Pedal Leg Spacer (114), which has a flat side. Slide a Wave Washer (88) and the Pedal Leg Spacer onto the other axle of the Pedal Arm Axle (21); make sure that the flat side of the Pedal Leg Spacer is facing away from the Pedal Arm Axle.

Repeat this step for the other Pedal Arm Axle (not shown).

9

14

78

12

78 75

84

10

Curved Side

Grease

 

113 88

Flat Side

88

21

114

Grease

10

Page 10
Image 10
ProForm 831.23744.0 user manual Repeat this step for the other Pedal Arm Axle not shown