7.Slide the Console Cover (96) (see the drawing in step 6) upward to the Console (4). Attach the Console Cover with four M4 x 16mm Screws (84).
8.Apply a generous amount of the included grease to the Pivot Axle (16). Then, apply a small amount of grease to two Wave Washers (88).
Insert the Pivot Axle (16) into the Upright (2). Slide a Wave Washer (88) onto each end of the Pivot Axle.
Identify the Left Upper Body Leg (6), which is marked with an “L” sticker. Slide the Left Upper Body Leg onto the Pivot Axle (16). Attach the Left Upper Body Leg with an M6 x 16mm Button Screw (80) and a Large Axle Cover (20). Attach the Right Upper Body Leg (124) in the same way.
7 |
|
|
|
| 4 |
|
| 96 |
|
| 84 |
|
| 84 |
8 |
|
|
|
| 2 |
80 |
| 88 |
|
| |
| 20 |
|
|
| 16 |
| 6 | 20 |
|
| |
|
| 80 |
|
| 88 |
|
| Grease |
|
| 124 |
9
