1.
To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser.
Pull the ramp handle outward and lower the Ramp (104) until it rests on the Frame (1).
Attach a Wheel (50) to the front of the Frame
(1)with an M10 x 35mm Shoulder Screw (63).
Attach the other Wheel (50) in the same way.
2.Identify the Right Frame Cover (49), which is marked with an “R” sticker. Then, orient the Right Frame Cover with the rounded side in the indicated location. While another person lifts the rear of the Frame (1), attach the Right Frame Cover with two M4 x 16mm Screws (84).
Repeat this step for the Left Frame Cover (48).
1
Ramp
Handle
104
1
50
63
2
Rounded
Side
48
Rounded
Side
1
84 
49
6
