ProForm 831.23744.0 user manual Assembly, wrench , and rubber mallet

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own Phillips screwdriver , adjustable

wrench , and rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the parts bag, check to see if it has been preassembled. If a part is missing, call 1-888-533-1333.

M6 Nylon			M6 Washer	Wave Washer	M10 Split
Locknut (77)–4			(118)–4	(88)–6	Washer (78)–10
M4 x 16mm	M4 x 16mm		M4 x 32mm Screw	M6 x 16mm Button	M6 x 38mm Button
Screw (84)–14	Flat Head		(95)–2	Screw (80)–6	Bolt (76)–4
	Screw (94)–4
M10 x 20mm Button		M10 x 35mm Shoulder		M10 x 70mm Button Screw (75)–6
Screw (79)–4			Screw (63)–2

5