37.Remove the indicated 3/8” Nylon Locknut (50) and
3 1/2” Pulley (24). Wrap the Low Cable (75) around the Pulley in the direction shown. Reattach the Pulley and tighten the Nylon Locknut. Make sure the Cable is routed exactly as shown and that the Cable Trap (25) is oriented to hold the Cable in place.
38.Attach the end of the Low Cable (75) to the indicated hole in the Leg Lever (41) with a 3/8” x 2 3/4” Bolt (46), two 3/8” Flat Washers (48), and a 3/8” Nylon Locknut (50). Do not overtighten the Nylon
LockNut; the Cable must pivot freely on the Bolt.
39.Identify the High Cable (72). It is longest cable, and has a ball on one end and a bolt on the other.
Wrap the High Cable (72) over a 3 1/2” Pulley (24). Attach the Pulley to the Press Top Frame (9) with a 3/8” x 3 1/2” Bolt (56), a 3/8” Flat Washer (48), and a 3/8” Nylon Jam Nut (63).
40.Wrap the High Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the Press Upright (2) with a 3/8” x 3 3/4” Bolt (59), a 3/8” Flat Washer (48), and a 3/8” Nylon Jam Nut (63).
37 |
| 75 |
|
|
|
|
|
| |
|
| 50 | 25 |
|
|
|
|
| |
| 24 |
|
|
|
38 |
|
|
|
|
| 41 |
|
|
|
46 | 75 |
|
|
|
| 48 |
|
|
|
|
|
| 50 |
|
|
| 48 |
|
|
39 |
|
|
|
|
|
| 24 |
|
|
|
| 56 |
|
|
|
|
|
| 9 |
|
| 72 | 48 | 63 |
40 |
|
|
|
|
| 72 | 63 |
|
|
|
|
| 25 | |
|
|
|
| 48 |
|
| 24 |
|
|
|
|
|
| 59 |
|
|
| 2 |
|
15
