C. The bolt on the Ab Cable (74) and the High Cable | C |
|
|
(72) that are attached to the weight stacks can also |
|
| |
|
|
| |
be used to tighten the cables. |
|
|
|
Remove the |
| 74 | 72 |
|
| ||
Tube (17). Tighten the 1/4” Nylon Locknut (68) onto | Bolt | 64 |
|
the bolt on the end of the Ab Cable (74) two turns. |
| ||
97 |
|
| |
Bolt (60) and the 5/16” Nylon Locknut (64). |
|
| |
The High Cable (72) can be tightened in the same | 60 | 71 |
|
|
| ||
manner. |
| 68 |
|
|
|
| |
Note: The shrouds are shown removed for clarity. |
| 17 |
|
The shrouds do not need to be removed to tight- |
|
|
|
en the cables. |
|
|
|
Note: If a cable tends to slip off the pulleys often, |
|
|
|
the cable may have become twisted. Remove the |
|
|
|
cable and |
|
|
|
If the cables need to be replaced, see Ordering |
|
|
|
Replacement Parts on the back cover of this manual. |
|
|
|
26
