Manuals / ProForm / Fitness & Sports / Treadmill

ProForm PFTL06009.0 user manual See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts

Models: PFTL06009.0

1 32

Page 10

8.Attach the handrail assembly to the Uprights (77, 78) with six 5/16" x 1" Bolts (3) and six 5/16" Star Washers (9) as shown.

See assembly steps 4 and 6. Firmly tighten the 3/8" x 4" Bolts (4).

9.Have a second person hold the console assem- bly near the handrail assembly.

Connect the two wires from the console assem- bly to the two wires from the handrail assembly.

See the inset drawing in step 7. The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CON- SOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

8					Handrail
					Assembly
3	9	9	3	3
		78		9
		78			9
				3	77
9		Console
		Assembly
		Wires			Wires
					Wires

Handrail

Assembly

10.Insert the wires from the console assembly into the handrail assembly.

Attach the console assembly to the handrail as- sembly with four 1/4" x 3/4" Bolts (5). Be careful not to pinch the wires.

10
Console
Assembly
Handrail
Assembly
Wires	5
5
10

Page 10

Image 10

ProForm PFTL06009.0 user manual See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts

Contents

Model No. PFTL06009.0 Serial No QUESTIONS?1CALL-888TOLL-533-FREE-1333 TACT THE STORE please contact Customer CareTABLE OF CONTENTS WARNING DECAL PLACEMENTmeets all of the specifications described on IMPORTANT PRECAUTIONSpre-existing health problems informed of all warnings and precautionsSAVE THESE INSTRUCTIONS 23. Never insert any object into any opening on the treadmillBEFORE YOU BEGIN rubber mallet ASSEMBLYadjustable wrench and scissorsovertighten the Nut the Wheel must turn 1. Make sure that the power cord is unpluggeddo not fully fold the Frame yet freely4, and 3/8 Star Washer the Wire Harness 87. Tighten the 3/8 xwith a second Bolt Spacer 82, 3/8 x 4 Bolt Upright Spacer 88. Be careful not to pinchBolts yet See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts this step is completed 3. Be careful not to pinch the wires. Reattach11. Raise the Frame 52 to the position shown Hold the receiver so the antenna is orientedHOW TO PLUG IN THE POWER CORD OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELT CONSOLE DIAGRAM FEATURES OF THE CONSOLEnot pulled from the console, adjust the position of HOW TO TURN ON THE POWERthe key can be pulled from the console, causing HOW TO USE THE MANUAL MODE 1. Insert the key into the console7. When you are finished exercising, remove the key from the console 5. Monitor your progress with the displays. The matrix-When you6. Measure your heart rate if desired 3. Start the walking belt HOW TO USE A PRESET WORKOUT 1. Insert the key into the console6. When you are finished exercising, remove the key from the console 4. Monitor your progress with the displays. See step 5 on page2. Select the Custom Workout Center HOW TO USE THE CUSTOM WORKOUT CENTER1. Insert the key into the console 6. When you are finished exercising, remove the key from the consoleHOW TO USE THE SOUND SYSTEM HOW TO USE THE WEIGHT LOSS WORKOUT CENTER2. Select a weight loss workout 6. When you are finished exercising, remove the key from the console2. Insert an iFit card and select a workout HOW TO USE AN IFIT CARD5. When you are finished exercising, remove the key from the console 1. Insert the key into the consoleTHE INFORMATION MODE THE OPTIONAL CHEST PULSE SENSORHOW TO LOWER THE TREADMILL FOR USE HOW TO FOLD AND MOVE THE TREADMILLHOW TO MOVE THE TREADMILL knob is locked in the storage positionPROBLEM The displays of the console do not function properly TROUBLESHOOTINGPROBLEM The power turns off during use compatible with GFCI-equipped outletsPROBLEM The incline of the treadmill does not change correctly PROBLEM The walking belt slows when walked onPROBLEM SOLUTION WORKOUT GUIDELINES EXERCISE GUIDELINESEXERCISE INTENSITY EXERCISE FREQUENCYDescription PART LIST-Model No. PFTL06009.0Key No. Qty Key No. QtyDescription 10 Black Wire, M/FDescription EXPLODED DRAWING A-Model No. PFTL06009.0 R0709A EXPLODED DRAWING B-Model No. PFTL06009.0 R0709A EXPLODED DRAWING C-Model No. PFTL06009.0 R0709A EXPLODED DRAWING D-Model No. PFTL06009.0 R0709A LIMITED WARRANTY ORDERING REPLACEMENT PARTSICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT