7. Attach the Base Cover (84) to the Base (94)

7

 

 

 

 

 

 

 

with four #8 x 1/2" Screws (1). Be careful not

 

 

 

 

 

 

 

to overtighten the Screws.

 

 

 

 

 

 

 

 

With the help of a second person, tip the tread-

84

 

1

 

 

 

 

mill so that the Base (94) is flat on the floor.

 

 

 

 

 

 

 

1

94

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

8. Identify the Left Handrail (78). Slide a Handrail

8

 

 

 

 

 

 

 

Cover (77) onto the lower end of the Left

 

 

 

 

 

 

 

Handrail. Remove the tie from the bracket on

 

 

 

 

 

 

 

 

the Left Handrail. If necessary, press the Cage

 

 

 

 

 

Tie

 

 

Nut (not shown) back into place.

 

78

 

 

 

4

 

Insert the bracket on the Left Handrail (78) into

 

 

 

 

 

 

the top of the Left Upright (82) and at the same

 

 

 

 

Bracket

 

9

 

time slide the lower end of the Left Handrail onto

 

 

 

 

 

5

the bracket on the Left Upright.

 

 

 

 

82

 

 

Start two 5/16" x 3/4" Patch Bolts (5) and two

 

 

 

8

 

 

 

5/16" Star Washers (9) into the Left Upright (82)

 

 

 

 

 

 

 

and the Left Handrail (78). Then, start a 5/16" x

 

 

 

 

 

 

 

 

1 1/2" Patch Bolt (4). Do not tighten the Patch

 

 

 

 

 

 

 

 

Bolts yet.

 

 

77

 

 

 

 

 

Start a 1/4" x 1/2" Patch Bolt (8) into the lower

 

 

 

 

 

 

 

end of the Left Handrail (78). Tighten all four

 

 

 

Bracket

 

 

 

Patch Bolts used in this step. Slide the

 

 

 

 

 

 

Handrail Cover (77) against the Left Upright

 

 

 

 

 

 

 

 

(82).

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

Page 10
Image 10
ProForm PFTL10909.0 R1009A warranty To overtighten the Screws, Patch Bolt 4. Do not tighten the Patch Bolts yet