10.Set the Console Base (67) onto the top of the Handrails (40). Next, start the two Console Bolts
(2) with 1/4” Star Washers (8) into the Handrails and the Console Base. Do not fully tighten the Bolts yet. Start all four 3/4” Screws (3) before tightening them. Be careful not to overtighten the Screws. Tighten the two Console Bolts.
11. Lower the Uprights (38, 39).
See the inset drawing. Position the Uprights (38,
39)so that the treadmill Frame (36) is centered between the Uprights.
Firmly tighten the Upright Bolts (4) on each side of the treadmill.
12.Attach the ground wire on the Upright Wire (69) to the indicated hole in the Base (37) with a Silver Ground Screw (10).
Press the indicated Grommet (72) into the Right Upright (39).
Align the holes in the Right Base Leg Cover (42) with the holes in the Base (37). Note: It may be necessary to press on the Right Base Leg Cover to align the holes. Attach the Right Base Leg Cover (42) with three 1/2" Screws (83). Be care- ful not to pinch the Upright Wire (69). Do not overtighten the Screws.
10 |
|
|
|
|
|
|
| Front View | |
| 67 |
| ||
|
|
| ||
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
40 |
| 40 |
|
| |
| 8 | 3 |
3 |
| |
2 | 8 | |
|
| |
|
| 2 |
11 | Side View |
|
|
| |
|
| 4 |
| 38, 39 | |
| View from Above | |
38 | 36 | 39 |
12 | 83 | 39 |
| ||
| 72 |
|
| 69 |
|
Ground Wire 
83 10
37
42
83
10
