7 Measure your heart rate if desired.
To measure your heart rate, stand on the foot rails and place your thumb on the pulse sensor (see the drawing on page 13). Do not press too hard, or the circulation in your thumb will be restricted and your pulse may not be detected. When your pulse is detected, a
If the displayed heart rate appears to be too high or too low, or if your heart rate is not displayed, lift your thumb for a few seconds, and then reposition your thumb on the pulse sensor. Remember to stand still while measuring your heart rate.
When you are finished exercising, remove the
8 key from the console.
Change the incline of the treadmill to the low- est level by holding down the Incline decrease button. If this is not done, the latch may not hold the treadmill in the storage position.
Step onto the foot rails and press the Stop button. Next, remove the key from the console and put it in a secure place.
Switch the reset/off circuit breaker to the “off” posi- tion and unplug the power cord.
15
