Task 2: Installing the SuperTrak Card

Task 2: Installing the SuperTrak Card

The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express X8 slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.

1.Remove the cover of your PC or enclosure.

2.Remove the inside slot cover of an available PCI-Express slot on the motherboard.

3.Install the SuperTrak card into the open PCI-Express slot.

4.Fasten the SuperTrak card bracket to the PC or enclosure case.

5.Attach t to one of the SAS ports on the SuperTrak card. See Figure 1.

5

Page 5
Image 5
Promise Technology EX16650 manual Task 2 Installing the SuperTrak Card