SuperTrak EX16650 Quick Start Guide
Task 8: Setting up WebPAM PRO
The first time you use WebPAM PRO, you must add the Host PC so that WebPAM PRO will recognize it. You only need to perform this procedure once.
To add the Host PC:
1.In the Tree, on the left side of the WebPAM PRO screen, click the Subsystem/Host Management icon.
Figure 5. WebPAM PRO initial screen
Click the Subsystem/Host Management icon
2.Click the Add Subsystem/Host tab.
3.In the Subsystem/Host Port IP address field, type the IP address of the Host PC where you installed the SuperTrak EX Controller card.
If you are working at the same Host PC where the SuperTrak card is installed, you can also type 127.0.0.1 in the IP address field.
Entries such as localhost or the Host PC’s network name do not work for this function.
16