SuperTrak EX4650, EX4650A, EX8650, EX8650A Quick Start Guide
18.To change the Read Cache Policy, highlight Read Cache Policy and press Enter.
Highlight your choice of None, Read Cache, or Read Ahead and press Enter.
19.Highlight Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive space available. To create another logical drive, repeat steps 4 though 18 above.
20.Press the F10 key to exit the SuperBuild utility and press Y to confirm and restart the computer.
Do not press the
You have successfully created a new RAID logical drive.
Important
You must be partition and format your new logical drive before you can use it. Use the same method of partitioning and formatting a logical drive as you would any other fixed disk added to your computer system.
Step 5: Installing Software Drivers
Drivers for Windows and some Linux operating systems are included on the Software CD that came with your SuperTrak EX Controller card. Please download the latest drivers from the Promise website at www.promise.com/ support.
See Chapter 3 of the SuperTrak User Manual on the Software CD for
14
