Promise Technology EX4650A, EX8650A quick start Installing the SuperTrak Card

SuperTrak EX4650, EX4650A, EX8650, EX8650A Quick Start Guide

Note

The SuperTrak EX Controller cards are PCI Plug-n-Play (PnP) devices. No changes are necessary in the motherboard CMOS/ BIOS Setup for resources or drive types in most applications.

Step 2: Installing the SuperTrak Card

The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express X8 slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.

1.Remove the cover of your PC or enclosure.

2.Remove the inside slot cover of an available PCI-Express slot on the motherboard.

3.Install the SuperTrak card into the open PCI-Express slot.

4.Fasten the SuperTrak card bracket to the PC or enclosure case.

5.Attach one end of a SAS multi-lane cable to a SAS port on the SuperTrak card.

See Figures 1 through 4.

4