Promise Technology TX8, TX4 user manual View Status Configure Array Configure Cache, Configure Scsi

UltraTrak100 TX4 and UltraTrak100 TX8 User Manual

The first line of the Idle mode menu will display one of the following status messages:

•	Array Functional	The array is fully operational, and no problems are
		present.
•	Array Critical	The array is operational, but has lost its fault tolerance.
		For RAID array levels 1, 3 and, 5 the array contains a
		failed drive. The user should identify and replace the
		failed drive.
•	Array Offline	The array is no longer operational. The array must be
		rebuilt from the last tape backup or other device. For
		RAID levels 1, 3, and 5, at least two or more drives in
		the array have failed. For a RAID 0 array, at least one
		drive has failed. The user should identify and replace
		the failed drives.

The second line of the Idle mode menu can also provides the following error information:

• Fan Error Fan speed is <2000RPM or >5500RPM

•Array Rebuilding xx% At least one array is rebuilding

•Array Synchronizing xx% At least one array doing synchronize

CONFIGURATION MENU

In Configuration mode you may view the status of the UltraTrak100 system and configure both UltraTrak100 hardware and arrays. The main configuration menu allows the user to select the following menus:

	View Status
	Configure Array
	Configure Cache				Press or to move these items on the LCD.
	Configure SCSI
What you can do:
	Press SEL:		Selects one of the following active functions:
	View Status			Moves the display to the View Status menu.
	Configure Array			Moves the display to the Configure Array menu.
	Configure Cache			Moves the display to the Configure Cache menu.
	Configure SCSI			Moves the display to the Configure SCSI menu.
	Press	:	Moves the active message line up. (Active is marked by *.)
	Press	:	Moves the active message line down. (Active is marked by *.)
	Press EXIT:		Returns to the Idle mode.

20