Configure SCSI
Mode
ID
LUN
SCSI ID
See below
See page 34
List SCSI IDs 0 thru 15 to be selected from.
CONFIGURE SCSI
The Configure SCSI menu will allow the setting of SCSI parameters. The following parameters are set in the configure SCSI menu:
Mode
SCSI ID
What you can do:
Press SEL: | Selects one of the following active functions: | |
Mode |
| Move the display to the Mode menu. |
SCSI ID | Move the display to the SCSI ID menu. | |
Press | : | Moves the active message line up. (Active is marked by *.) |
| ||
Press | : | Moves the active message line down. (Active is marked by *.) |
| ||
Press EXIT: | Returns to the Configuration menu. | |
MODE
Select one of the following SCSI ID modes:
ID Selected
LUN
Selected toggles between these two when SEL is pressed.
What you can do:
Press SEL:
ID
LUN
Press 
:
Press 
:
Press EXIT:
Selects one of the following active functions: Select device ID mode.
Select LUN (logical unit number) mode. Moves the active message line up. (Active is marked by *.) Moves the active message line down. (Active is marked by *.) Returns to the Configure SCSI menu.
33
