UltraTrak100 TX4 and UltraTrak100 TX8 User Manual
When using ID mode, if you have multiple arrays within an UltraTrak100 unit, each array will use a separate SCSI ID. When using LUN mode, each UltraTrak100 unit will use a single SCSI ID, with the first array being LUN 0, the second array being LUN1, etc. Enable Multiple LUN support in your SCSI adapter if you choose LUN mode. In most cases it is preferable to use ID mode.
SCSI ID
Select a SCSI ID between 0 and 15:
0 |
|
1 | Selected |
2 | Press | or to move these items on the LCD. | |
… | |||
|
| ||
15 |
|
|
What you can do:
Press SEL: Selects one of the following active functions:
from a list of numbers between 1 and 15.
Selects the SCSI ID – The word Selected appears next to the selected ID.
Press | : | Moves the active message line up. (Active is marked by *.) |
| ||
Press | : | Moves the active message line down. (Active is marked by *.) |
| ||
Press EXIT: | Returns to the Configure SCSI menu. | |
Note
If you have multiple arrays and are using ID mode, be aware that each array will use a SCSI ID. If, for example, you have created two separate arrays and have selected SCSI ID 4, array 1 would have SCSI ID 4 and array 2 would have SCSI ID 5.
34
