5–Fibre Channel Noninteractive Commands
-c (Show Parameter Settings)
SN0054667-00 C 5-7

-c

(Show Parameter Settings)

Use the -c command to show the parameter settings for all adapters in the
system:
#qaucli -pr fc -c [ <all> ]
To show the parameter settings for a specific adapter, issue the following
command:
#qaucli -pr fc -c (<hba instance> | <hba wwpn>)
Where:

-cna

(FCoE Utilities Menu for QLE81xx and QLE82xx Adapters)

Use the -cna command to work with converged network adapters (QLE81xx
and QLE82xx).
The -cna command line options use the following variables:
To view general information for the adapter, issue the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --geninfo
To view data center bridging exchange protocol settings, issue the following
command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --dcb --info
To update the message passing interface (MPI) configuration table on the adapter
from a file, issue the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --updatecfg
<mpi file>
hba instance =Adapter number (use -g command to find)
hba wwpn =World wide port name of the adapter
hba instance =Adapter instance number of a converged network adapter port
hba wwpn =World wide port name of a converged network adapter port
mpi file =MPI configuration DAT file
--detail =View detailed format
--raw =View raw format
param name =Parameter name
param alias =Parameter alias
param value =Parameter value