Other HCAs, Table D-8. OpenSM-Devel/RPM | Q-Logic IB0056101-00 G.02

A

Package Descriptions Other HCAs

Table D-8. OpenSM-Devel/RPM

RPM Name

opensm-devel-xxx.x86_64.rpm

Development files for OpenSM

Comments

Optional for OpenSM

Other HCAs

The packages in Table D-9should be installed only if other HCAs are used.

Table D-9. Other HCAs/RPMs

RPM Name	Comments

libcxgb3-xxx.x86 64.rpm	Optional for
Support for the Chelsio 10GbE HCA	OpenFabrics
Support for the Chelsio 10GbE HCA

libmlx4-xxx.x86 64.rpm	Optional for
Userspace driver for Mellanox® ConnectX™ InfiniBand HCAs	OpenFabrics

libmthca-xxx.x86 64.rpm	Optional for
Provides a device-specific userspace driver for Mellanox HCAs for use	OpenFabrics

with the libibverbs library

libnes-xxx.x86 64.rpm	Optional for
Provides a userspace driver for NetEffect RNICs for use with the	OpenFabrics

libibverbs library

mstflint-xxx.1x86 64.rpm	Optional for
Firmware update tool for other HCAs	OpenFabrics
Firmware update tool for other HCAs

tvflash-xxx.x86 64.rpm	Optional for
Query and update the firmware flash memory for other HCAs	OpenFabrics
Query and update the firmware flash memory for other HCAs

The development RPMs in Table D-10are only needed on the nodes where programs are compiled

Table D-10. Other HCAs-Devel/RPMs

RPM Name	Comments

libcxgb3-devel-xxx.x86_64.rpm	Optional for
Development files for the Chelsio 10GbE HCA	OpenFabrics
Development files for the Chelsio 10GbE HCA

IB0056101-00 G.02

Preliminary

D-9

Image 115

Q-Logic IB0056101-00 G.02 Table D-8. OpenSM-Devel/RPM, Table D-9. Other HCAs/RPMs, Table D-10. Other HCAs-Devel/RPMs

Contents

QLogic HCA and QLogic Ofed Software Install Guide Document Revision History Preliminary Preliminary Removed phrase and Transmission Control Ates Error Ipathether Configuration Setup GenerMoved table InfiniPath and OpenFabrics Removed note OpenFabrics programs 32-bit Preliminary Table of Contents Software Installation Installation Verification and Additional Settings Write Combining List of Figures Preliminary Who Should Read this Guide IntroductionHow this Guide is Organized Overview Meaning InteroperabilityConventions Used in this Guide Typographical Conventions Product documentation includes Documentation Support Headquarters Contact Information Preliminary Features Feature Overview Support Other Changes Description QLogic Adapter Model Numbers „ Ofed SRP Software Components Hardware Installation Step-by-Step Installation Checklist Software Installation Preliminary Preliminary Adapter Models and Related Platforms Hardware InstallationHardware Installation Requirements Hardware Run ipath control Form Factors QLogic InfiniBand Cables Cabling and SwitchesProduct Number Description Configuring the Bios Unpacking Information Safety with ElectricityVerify the Package Contents List of the Package Contents Hardware Installation Unpacking Information QLogic QLE7280 with IBA7220 Asic Asic Unpacking the QLogic Adapter Dual Adapter Installation PCIe Slot in a Typical Motherboard QLogic PCIe HCA Assembly with Riser Card Assembled PCIe HCA with Riser Hardware Installation for QHT7140 with HTX Riser HTX Slot QLogic QHT7140 Adapter with Riser Card Assembled QHT7140 with Riser Hardware Installation for the QHT7140 Without an HTX Riser Cabling the Adapter to the InfiniBand Switch Switch Configuration and Monitoring Completing the Installation Supported Linux Distributions Software InstallationCluster Setup Types of Nodes in a Cluster Environment Distribution Identifiers Distribution IdentifiersInfiniPath/OpenFabrics Supported Distributions and Kernels Distribution InfiniPath/OpenFabrics Supported Kernels Sles10 Setting Up Your EnvironmentCompiler Support Rhel5 Specific Component Requirements Choose the Appropriate Download FilesRequired OS Packages OS Distribution Required Packages Available Packages for QLogic Ofed 1.4 Release Package Description Installation Documentation Install InfiniPath and OpenFab Kit on Install QLogicIB-Basic with the Installer Tool You will see a screen similar to this Ofed SDP Then type n to proceed to the next screen Next screen contains these choices Configure Ofed IP over IB IPV4 addresses now? n # ./INSTALL --32bit Additional component names allowed for -Eand -Doptions Install -Clists all the available components, which includeInstall Options Command Meaning About rpm Installation Using rpm to Install InfiniPath and OpenFabrics Become root, then RPM Organization Next, install all non-prefixed RPMs Install QLogic Ofed User-level Software with the rpm Command Finally, install the prefixed RPMs in /usr/mpi/qlogic Software Installation Install Frontend and Compute Nodes Install QLogic Ofed Using Rocks Rocks Installation on an Existing Frontend Node Use the following command to rebuild the entire cluster Install QLogic Ofed Using a Platform OCS KitInstall FastFabric Software CD/ISO Image Then use the following command for each node MPI include files are Install Additional SoftwareInstalled Layout Installing Lustre Uninstalling InfiniPath and OpenFabrics RPMs Uninstalling Using the Installer ToolRemoving Software Packages Downgrading RPMs Uninstalling Software with Rocks or Platform OCSQlc is a part of all the InfiniPath package names Preliminary OpenFabrics Drivers and Services Configuration and Startup Configuring Drivers and ServicesInfiniPath and OpenFabrics Driver Overview Type Configuring the IPoIB Network InterfaceTo verify the configuration, type Output from this command will be similar to this OpenSM Command to disable it on reboot is To use Ofed SRP, follow these steps You can stop opensmd again like thisEtc/init.d/opensmd Guid Output, look for lines similar to these Configuring and Administering the Vnic Interface # ibqlgcvnicquery Preliminary Etc/infiniband/qlgcvnic.cfg Create the Vnic interfaces using the configuration file RX CSUM=TRUE HEARTBEAT=100 Preliminary To restart the QLogic Vnic driver, run the following command This information is collected from MPI over uDAPL On every node, type the following command as root Other Configuration Changing the MTU Size Etc/infiniband/openib.conf Managing the InfiniPath Driver Device files are Configure InfiniPath Driver StateTo enable the driver, use the command as root Start, Stop or Restart InfiniPath Sequence of commands to restart the driver are as follows Further Information on Configuring and Loading DriversUnloading the Driver/Modules Manually Preliminary LED Link and Data Indicators Installation Verification and Additional SettingsAdapter and Other Settings This will also show link speed Customer Acceptance UtilityHostname1 Hostname2 Ipath checkout Options Preliminary Some HTX Motherboards May Need Two or More CPUs in Use Installation TroubleshootingHardware Issues Node Spontaneously Reboots Issue with Supermicro H8DCE-HTe and QHT7040 Bios SettingsSoftware Installation Issues Enable Advanced Configuration and Power Interface Acpi # yum install kernel-devel Resolving Conflicts Mpirun Installation Requires 32-bit Support Check your distribution for the exact RPM name Configuration IssuesLockable Memory Error on Initial Installation of InfiniPath Outdated ipathether Configuration Setup Generates Error Eth2 error fetching interface information Device not found Introduction Write CombiningVerify Write Combining is Working PAT and Write Combining Edit Bios Settings to Fix Mtrr IssuesMtrr Mapping and Write Combining Use the ipathmtrr Script to Fix Mtrr Issues Preliminary Table C-1. Configuration Files Configuration FilesConfiguration File Name Description Qlgcvnictools subdirectory Also installed in /etc/infinibandSample and Template Files Description With the Ofed documentation, or Package Names with the QLogicIB-Basic Download Package DescriptionsDifferent Nodes May Use Different RPMs OpenFabrics RPM Names InfiniPath RPM Version Numbers and IdentifiersInfiniPath and OpenFabrics RPMs Table D-2. InfiniPath/RPMs Documentation RPMsInfiniPath RPMs Table D-1. Documentation/RPMs Table D-5. OpenFabrics/RPMs OpenFabrics RPMsTable D-3. InfiniPath-Devel/RPMs Table D-4. InfiniPath-MPI/RPMs Ibutils-xxx.x8664.rpm Dapl-xxx.x8664.rpmDapl-utils-xxx.x8664.rpm Ibsim-xxx.x8664.rpm Librdmacm-xxx.x86 64.rpm Libibverbs-xxx.x8664.rpmLibibverbs-utils-xxx.x8664.rpm Libipathverbs-xxx.x86 64.rpm Table D-6. OpenFabrics-Devel/RPMs Table D-7. OpenSM/RPM Table D-10. Other HCAs-Devel/RPMs Other HCAsTable D-8. OpenSM-Devel/RPM Table D-9. Other HCAs/RPMs Table D-11. OtherMPIs/RPMs Other MPIs Openmpipathscaleqlc-xxx.yyy.x8664.rpm Openmpigcc-xxx.x8664.rpmOpenmpigccqlc-xxx.yyy.x8664.rpm Openmpiintelqlc-xxx.yyy.x8664.rpm a Preliminary Index Form factors for HCAs Hardware installation overview HTX motherboards may required two or more CPUs A-1 Hardware requirementsModule Mpi-selector 5-15,5-18 Skip=LIST 7-3Software VNIC, configurationPage Preliminary