Q-Logic SN0135524-00

Cisco MDS 9000 Series Switches

Domain ID Configuration

QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 95

VERSION 1.0, MARCH 2003

3. From the Domain Manager dialog box, select the Configuration tab. For the VSAN to which

you will connect the E-port, do the following:

a. In the Domain ID field, type or edit the Domain ID as appropriate.

b. Set the ConfigDom ain IdType field to Static.

c. Click Apply.

Cisco CLI

NOTE: Use the following CLI commands when the Cisco Device Manager is not available.

Password: ********

Cisco_9216# config t

Cisco_9216(config)# fcdomain domain <domain id> static vsan <vsan id>

Cisco_9216(config)# fcdomain restart disruptive vsan <vsan id>

Cisco_9216(config)# end

If you want these changes to remain through a switch reset, enter the following command.

Cisco_9216# copy running-config startup-config