IBM eServer BladeCenter Fibre Channel Switch Module
Zone Configuration
PAGE 142 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
For the QLogic SANbox2-64, the following displays:
QLogic CLI
NOTE: Use the CLI commands when the QLogic SANbox Manager GUI is not available. The
procedures are the same for the QLogic SANbox2-8, SANbox2-16, and SANbox2-64.
Login: admin
Password: xxxxxxxx
SANbox2 #> zone list
Zone Types
This configuration supports all IBM eServer BladeCenter Fibre Channel Switch Module and QLogic
SANbox2 Zone types.