McDATA Sphereon 4500 Switch
Supported Switches and Firmware Versions
PAGE 184 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Supported Switches and Firmware Versions
The following QLogic switches have been tested in the QLogic environment and comply with the
FC-SW-2 standard. QLogic switches have tested interoperable with the following switch from
McDATA that complies with the FC-SW-2 standard.
Domain ID Configuration
To ensure that there are no conflicts between switches, we recommend that each switch have an
assigned Domain ID. The following steps show how to set the DomainID on both the McDATA
switch and the QLogic switch.
The Domain ID should be locked and unique within the 97–127 (0x61–0x7f) range. This is
equivalent to 1–31 on the McDATA switch. The following chart lists the McDATA DomainID and
the corresponding QLogic Domain ID.
r
QLogic and McDATA Supported Switch and Firmware Versions
Manufacturer Switch Model Firmware Version
QLogic SANbox2-8 Switch 1.3.x and above
SANbox2-16 Switch 1.3.x and above
SANbox2-64 Switch 1.5.x and above
McDATA Sphereon 4500 Switch 04.01.00 12 or above
McDATA Versus QLogic Domain IDs
McDATA
Domain ID
QLogic
Domain ID
McDATA
Domain ID
QLogic
Domain ID
McDATA
Domain ID
QLogic
Domain ID
197 11 107 21 117
298 12 108 22 118
399 13 109 23 119
4100 14 110 24 120
5101 15 111 25 121
6102 16 112 26 122
7103 17 113 27 123
8104 18 114 28 124
9105 19 115 29 125
10 106 20 116 30 126
————31 127