IBM eServer BladeCenter Fibre Channel Switch Module
Timeout Values
QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 133
VERSION 1.0, MARCH 2003
QLogic SANbox Manager GUI
ATTENTION!! The following steps take the switch offline; therefore, do not perform them on a
switch being managed in-band.
1. Start the SANbox Manager application. The SANbox Manager—Faceplate dialog box
displays.
2. From the SANbox Manager—Faceplate dialog box Switch menu, select Switch Properties.
For the QLogic SANbox2-8 and SANbox2-16, the following displays: