Brocade SilkWorm 3200 and SilkWorm 3800 Switches
Zone Configuration
QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 25
VERSION 1.0, MARCH 2003
Zone Configuration
This section discusses configuring active Zone Set names and Zone types.
Active Zone Set Names
The Zone and Zone Set names on each switch must be unique. If not, change one of the duplicate
names. All Zone Set and Zone names must conform to the Fibre Channel (FC) Standards for Zone
Naming (ANSI T11/00-427v3):
1. Must be 1–64 characters in length.
2. All characters are ASCII.
3. First character is [a–z] or [A–Z].
4. All other characters must be [a–z], [A–Z], [0–9], or the _ character. Other characters ($-^) may
not be supported by all vendors and should be avoided.
Brocade’s Web Tools
1. Start Brocade’s Web Tools. The Fabric View dialog box displays.
2. From the Fabric View dialog box, click the Zone Admin button.