QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 119
VERSION 1.0, MARCH 2003
Merging QLogic and IBM BladeCenter Fabrics
The following QLogic switches have been tested in the QLogic environment and comply with the
FC-SW-2 standard. QLogic switches have tested interoperable with the following IBM eServer
BladeCenter Fibre Channel Switch Module that complies with the FC-SW-2 standard.
IBM eServer BladeCenter Fibre Channel Switch Module (see page121) provides detailed
information about merging QLogic and IBM BladeCenter fabrics.
QLogic and IBM Supported Switch and Firmware Versions
Manufacturer Switch Model Firmware Version
QLogic SANbox2-8 1.3.x and above
SANbox2-16 1.3.x and above
SANbox2-64 1.5.x and above
IBM IBM eServer BladeCenter
Fibre Channel Switch Module
1.4.0.35.00 or above