McDATA Sphereon 4500 Switch
Zone Configuration
QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 203
VERSION 1.0, MARCH 2003
3. On the navigation panel, select Configure. The Configure dialog box displays. Select the
Zoning tab, then select the Zones tab. Verify that the Zone names conform to the standards
for zone naming as discussed under “Active Zone Set Names” on page201 .
McDATA Telnet CLI
NOTE: Use the following CLI commands when McDATA Sphereon Web Management is not
available.
Username: Administrator
Password: xxxxxxxx
Root> show
Show> zoning
Verify that the Zone Set and Zone Names conform to the standards for zone naming as discussed
under “Active Zone Set Names” on page201.