IBM eServer BladeCenter Fibre Channel Switch Module
Operating Mode Configuration
QLOGIC SWITCH INTEROPERABILITY GUIDE PAGE 143
VERSION 1.0, MARCH 2003
Operating Mode Configuration
NOTE: Perform the following steps only when connecting from a QLogic SANbox2-8 or
SANbox2-16 with version1.3.xxx firmware.
IBM eServer BladeCenter SAN Utility
Not applicable.
IBM eServer BladeCenter Fibre Channel Switch Module CLI
Not applicable.
QLogic SANbox Manager GUI
1. Start the SANbox Manager application. The SANbox Manager—Faceplate dialog box
displays.
2. From the SANbox Manager—Faceplate dialog box Zoning menu, select Edit Zoning
Config.