User Manual for Commercial Series Net DVR
Page 57 Total 121
Display mode: There are sever al display modes: Opa que&Steady, Transparent&Steady,
Transparent&Fla shin g, Opaque&Fl as hing,
Move “Active Frame” to “OSD” item, you can select one mode.
Display position and format: Move “Active Frame” to “Position” button on the right side of
“OSD”, press 【ENTER】to enter into setup image, there are 22*18 (for NTSC, 22*15) small
panes, and OSD position is in red. You can use【â】【 á 】【 à 】【 ß 】 keys to move the OSD position.
Press【EDIT】key to select OSD format. There are following OSD formats:
MM DD YYYY W hh:mm:ss (default)
MM DD YYYY hh:mm: ss
YYYY MM DD W hh:mm:ss
YYYY MM DD hh:mm:ss
Here YYYY means year, MM means month, DD means day, W means weekday, hh menas
hour, mm means minute and ss means second.
Press【ENTER】 to sa ve an d ret ur n to “Image” menu or press【ESC】to abort modification.
Copy parameters: After you setup the properties of one camera, you can copy it’s parameter
to any other camera or all cameras.
After you save t he modi fi cati on, it wil l bec ome e ffect ive. You can pres s “ Cancel ” but ton or
【ESC】key to abort.
Camera Name
In “Image Setup” menu, you can define name for each camera. Please note that camera’s
name can not be copi e d.