User Manual for Commercial Series Net DVR
Page 76 Total 121
and the other is “ Handle” . If you s elect “ Handle” o ption, yo u can acti vate “ Policy” an d “PTZ
Linkage” buttons on right side. Move “Active Frame” to “Policy” button and press【ENTER】key,
you will enter into “Alarm in Handling” sub menu:
Step 4: Alarm trigger record channel setup
You can select channel s to record for ea ch alarm inp ut. In the sub me nu, you can use
【ENTER】or【EDIT】key to enable record channel. “×” means disable and “ü means enable.
Note: In order t o trigger the channel to r ecord, in “Re cording” menu, you must ena ble
recording and select record type as “Alarm” or other related type. Please refer to chapter 5.12.
Step 5: Schedule for alarm handle method
When an externa l alarm occ urs in the s chedule, t he DVR will respond acc ording to t he
handle methods.
Step 6: Alarm handle method
You can select one or more han dle methods : “On Scr een Warning”, “ Audible Warnin g”,
“Upload to Center” and “Trigger Alarm Output”.
Description: If “On Screen Warning” is enabled, when an external alarm happens and DVR is
in preview mode, DVR will display the related camera. If you trigger more than one camera, DVR
will display the m one by one every 1 0 seconds . When the external alarm en ds, the DV R will
return to preview mode.
Step 7: Save setup
In “Alarm in Handling” sub menu, press “Confirm” button and return to “Alarms” menu. In
“Alarms” menu, press “Confirm” button to save the parameters.
Step 8: PTZ Linkage