User Manual for Commercial Series Net DVR
Page 77 Total 121
Move “Active Fra me” to “PTZ Linkage” button, press【 ENTER】key to enter i nto “ PTZ
Linkage” setup menu:
First select one camera, then select one of following PTZ linkage:
l Preset: Set the flag as “ü” to enable preset, in the preset number edit box and input one
preset number that has been setup already. Please refer to chapter 6.15 for preset setup.
l Sequence: Set the flag as “ü” to enable sequence and input one sequence number that
has been setup already. Please refer to chapter 6.15 for sequence setup.
l Cruise: Set the flag as “ü” to enable cruise. Please refer to chapter 6.15 for cruise setup.
Press “Confirm” b utton to save a nd return t o “Alarms” me nu. Press “Ca ncel” button or
【ESC】key to abort a nd return to “Ala rms” menu.
Note: Please make sure that the PTZ y ou are using ca n support preset , sequen ce and cruise
functions. One external alarm input can trigger many cameras PTZ linkage.
Step 9: Copy the parameters to other external alarm inputs: You can copy the parameters
of current alarm input to other external inputs.
Step 10: Save setup: In “Alarms” menu, pre ss “Confir m” butt on to sa ve the par ameters.
Press “Cancel” b utton or【ESC】key to abort.
Alarm relay output setup
Step 1: In “Alarms” menu, use【↑】【↓】keys to select one alarm output.
Step 2: Select delay time
The delay time is whe n t he a la rm ha s s top ped, t he a la rm out p ut wi ll c o nti nue t o out put for a
specified time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2