Digital Video Recorder User Manual
DVR supports PS/2 or USB mouse through the ports on the rear panel, please refer to Fig 2.10 Remote Control.
Notice: If mouse is not detected or doesn't work, try the following:
1.
2.Power off/on several times
3.Try another mouse
The structure of the main menu is shown in Fig 2.10 Remote Control
Click left button on one camera to display full screen. Click again to return to the previous screen display.
Click right button to show the control bar at the bottom of the screen as Fig
2.10Remote Control. Here are all the control and setup options. Click right mouse again to hide the control bar.
Click left button to enter. Click right button to cancel setup, or return to the previous screen.
If you want to input a value, move cursor to the blank and click. An input window will appear as Fig. 2.11. The menu supports number, letter and symbol input.
Fig 2.11 Digital Numbers and Letters Input Window
Users can change some values by using the mouse wheel, such as time. Move cursor onto the value, and roll the wheel when the value changes.
The menu supports mouse drag. i.e. Set motion detection area: click customized, hold left button and drag to set motion detection area. Set schedule: hold left button and drag to set schedule time
Click left button to choose the options. Click right button to return to searching mode.
Click left button to choose the options. Click right button to return to live.
Click left button to choose the buttons to control the PTZ. Click right button to return to searching mode.
10