Q-See setup guide MYQ-SEE Ddns Setup Guide for QT4 Series Dvrs, ~ 14 ~

MYQ-SEE DDNS SETUP GUIDE FOR QT4 SERIES DVRS

NOTE: Before you setup DDNS you must first set up Port Forwarding as directed in the PORT FORWARDING section of the Remote Access Quick Start Guide.

Once you have enabled Port Forwarding, you can configure your DDNS information by following these steps:

a.Using a computer that is connected to the same network as your Q-See DVR, use your IE Browser to go to http://myq- see.com.

b.Click on the New User? Link at the bottom of the page (http://myq-see.com/reg.asp).

c.Complete the registration process by following the on-screen directions and click the [Submit] button at the bottom of your screen (Fig 1).

Fig 7-8 Registration

Fig 1 Registration

~ 14 ~