QMS SC-100 user manual Troubleshooting, Questions and Answers

7.TROUBLESHOOTING

If you have any operational problem, please check the following troubleshooting hints.

7.1QUESTIONS AND ANSWERS

Question: Why the scanned image always comes out to be too dark?

Answer: 1) Modify the Gamma setting to 1.8 for your monitor and, when printing, set Gamma to 2.2 for your printer.

2)Use the Brightness setting of the TWAIN user interface to get a brighter image.

Question: The scanning speed of my QMS SC-100 is much slower than that of those installed at other computers. Can I speed it up?

Answer: Set you PC printer port to the EPP mode from BIOS setting.

Question: Why does my QMS SC-100 scan at a very low speed?

Answer: If you have installed Works for Windows, it will install Window Printing System (WPS) in your WIN.INI file. This will take up the printer port time remarkably. You can remove the WPS from your WIN.INI file, as follows:

7-1