R

2100 Millennium Wood Stove (ACC)

E. Baffle Removal

F. Snap Disc Replacement

1.Remove all ash from the firebox, and extinguish all hot embers before disposal into a metal container.

2.The baffle board has 2 pieces. With the ceramic blanket still in place, slide one baffle piece over the top of other one and pull out top piece through the door opening and then remove bottom baffle piece. Figure 31.1.

3.Remove the ceramic blanket.

4.Re-install the baffle pieces one piece at a time. Be sure the baffle boards are even with the front manifold tube and is resting on all tubes. Figure 23.1 on page 23. See Also

Correct Blanket & Baffle Position on page 24.

5.To re-install the ceramic blanket, it is easier to fold it in half first. Figure 31.2. Place on top of baffle board, open up and flatten and smooth out the blanket. Re-check the baffle board for correct positioning. Figure 23.1 on page 23 and page 24.

Figure 31.1 - Baffle

1.Locate the snap disc bracket assembly at the bottom left rear corner of the stove. Figure 31. 3.

2.A magnet holds the bracket to the stove. Pull the bracket down away from the stove to expose the snap disc.

3.Pull the snap disc and spade connectors up and out of bracket as shown in Figure 31.4.

4.Using a Phillips head screw driver, remove the 2 screws from the snap disc and then remove the snap disc from the spade connectors. Replace with new snap disc and re-connect to spade connectors.

5.Push the snap disc and spade connectors back inside bracket and re-attach the bracket to the stove.

Snap Disc Location

Figure 31.3

Figure 31.2 - Ceramic Blanket

Snap Disc

Magnet

Spade

Connectors

Figure 31.4

May 5, 2011

7039-131H

Page 31

Page 31
Image 31
Quadra-Fire 21M-ACC owner manual Correct Blanket & Baffle Position on