3Dimensions and Clearances | Quadra-Fire 31M-ACC-GT, 31ST-ACC

R	3100 Wood Stove Series (ACC)

3Dimensions and Clearances

A. Appliance Dimensions

NOTE: Flue Collar size is 6 inch (152mm) diameter (ID)

Millennium Model

25 in. (635mm)

9-15/16 in.	C	12-1/2 in.
9-15/16 in.	L	12-1/2 in.
(237mm)		(318mm)

	10-15/16 in.
15-1/16 in.	(271mm)	14-15/16 in.

(383mm)	(373mm)

	30 in.	18-15/16 in.
		(475mm)
	(762mm)

Figure 9.1 Front View

26-11/16 in. (668mm)

24-5/16 in. (618mm)

6-11/16 in. (170mm)

C

L

	16 in. (406mm)	11-1/2 in.
	16 in. (406mm)	(292mm)
		(292mm)

20-3/4 in. (527mm)

Figure 9.2 Side View

March 2, 2007

7033-277C

Page 9

Image 9

Quadra-Fire 31M-ACC-GT, 31ST-ACC, 31M-ACC-NT, 31M-ACC-MBK 3Dimensions and Clearances, Millennium Model, Appliance Dimensions

Contents

Step Top Uni-Body Model Millennium Model Pedestal Model ShownFire Risk Welcome to the Quadra-Fire Family Wood Stove Series ACC Table of Contents BTU & Efﬁciency Speciﬁcations Listing and Code ApprovalsAppliance Certiﬁcation Mobile Home Approved Service / Maintenance Tip Fire SafetyAsphyxiation Risk Any such action that may cause a ﬁre hazard Fire Risk Wood Stove Series ACC Negative Pressure Appliance needs to draft properly for safety Venting Systems Wood Stove Series ACC Flue Draft ConsiderationsTools And Supplies Needed Inspect Appliance & Components and Pre-Use Check List Masonry Chimney Wood Stove Series ACC Typical Stove Systems 3Dimensions and Clearances Appliance DimensionsMillennium Model 34-1/4 in mm 457mm 14-15/16 19-1/16 in.379mm 484mm 33-1/8 Double Wall Pipe Wood Stove Series ACC Clearances to Combustibles UL and ULC Hearth Protection Requirements InstallationMillennium Model See Figure Wood Stove Series ACC Step-Top Uni-Body Model Wood Stove Series ACC Outside Air Kit Installation Items Needed for Installation not suppliedFire Risk Asphyxiation Risk Shock Risk Wood Stove Series ACC Blower Optional Venting Components Chimney Systems 5Chimney Requirements Air Clearances ComponentsInstructions Solid Pack Chimney with Metal Supports as a Thimble Installing Chimney Components Solid Pack Chimney with Metal Supports as a Thimble Cont’dChimney Height / Rise and Run Rule Wood Stove Series ACC Chimney Termination Requirements Part SRV7033-041 for installation in a mobile Home Mobile Home Installation Begin installing the ARS System 7Appliance Set Up Installing Pedestal Assembly Finishing the ARS InstallationStep Top model with a pedestal assembly you must attach Attach the 2 bottom screws of the mounting brackets to Installing Leg Kit Adjusting The Blower Speed Control Wood Stove Series ACC Door Handle Assembly Burning Process Operating InstructionsWood Selection & Storage Kindling or First Stage Air Controls Automatic Combustion Control ACC Burn Rates and Operating Efﬁciency Wood Stove Series ACC Building a Fire Wood Stove Series ACC Blower Operating Instructions Initial cold start-up and all Burn SettingsOpacity Smoke Overﬁring Issues Solutions Wood Stove Series ACC Frequently Asked Questions Creosote Chimney Cleaning General MaintenanceARS Operating and Cleaning Disposal of Ashes Glass Cleaning Glass ReplacementCleaning Plated Surfaces Fire Risk Injury Risk Brick Size Qty Wood Stove Series ACC Firebrick Replacement Bafﬂe Wood Stove Series ACC Bafﬂe Removal Snap Disc Replacement Wood Stove Series ACC Tube Channel Assembly Replacement Removing Tube Channel AssemblyReplacing Tube Channel Assembly Diagnostic Question Possible Causes of Condition Solutions Troubleshooting Don’t get enough/any heat. What can I do about it? Exploded view Reference Materials Sizes Step Top Uni-Body Model Item # Accessories Wood Stove Series ACC Service Parts & Accessories Item # Service Parts Item # Service Parts Date of Service Performed By Description of Service Wood Stove Series ACC Service And Maintenance Log Wood Stove Series ACC Homeowner’s Notes Wood Stove Series ACC Homeowner’s Notes Cont’d Wood Stove Series ACC Warranty Policy Lifetime Warranty Contact Information Wood Stove Series ACC