Quadra-Fire 31M-ACC-GT, 31ST-ACC, 31M-ACC-NT Wood Stove Series ACC, C. Firebrick Replacement

R

3100 Wood Stove Series (ACC)

C. Firebrick Replacement

Replace the firebrick if they become crumbly and/or if there is a 1/4 inch (6.35mm) gap between the bricks.

The firebox is lined with high quality firebrick, which has exceptional insulating properties. There is no need to use a grate; simply build a fire on the firebox floor. Do not operate appliance without firebrick.

1.After the coals have completely cooled, remove all old brick and ash from unit and vacuum firebox.

2.Remove new brick set from box and lay out to diagram shown.

3.Lay bottom bricks in unit.

4.Install rear bricks on the top of the bottom bricks. Slide top of bricks under clip on back of firebox wall and push bottom of brick back.

5.Install side bricks. Slide top of brick under clips on side of firebox and push the bottom of the brick until it is flush with the side of the unit.

		1		1
	1					1
	1	1		1		1
	1	1		1		1
4	2	2	2	2		3
					9 in.
			1-1/4 in.			1-1/4 in.
2	4-1/2 in.				3
6 in.
				2 in.	5 in.	2 in.
			8 in.
			4		3 in.
	1-1/4 in.

	1		1
	1					1
	1	1		1		1
	4	No brick, ARS		4
1		Grate Location				1
5	2	2	2	2		3
					9 in.
			1-1/4 in.			1-1/4 in.
2	4-1/2 in.				3
6 in.
				2 in.	5 in.	2 in.
			8 in.
			4		3 in.
	1-1/4 in.

Figure 33.2 - 3100 Step Top Brick Assembly

No.	Brick Size	Qty
1	9 x 4-1/2 x 1-1/4	10
2	6 x 4-1/2	4
3	9 x 4-1/2 with angle	1
4	4-1/2 x 4-1/2 x 1-1/4	2
5	9 x 3 with angle	1

Use Part 832-0550 when ordering individual brick. Provide brick dimension or copy this page, mark the desired brick and take it to your authorized dealer.

Figure 33.1 - 3100 Millennium Brick Assembly

No.	Brick Size	Qty
1	9 x 4-1/2 x 1-1/4	12
2	6 x 4-1/2	4
3	9 x 4-1/2 with angle	1
4	9 x 3 with angle	1

NOTE: The Ash Removal System is only available for the Step Top Model only and not for the Millennium Model.

March 2, 2007 7033-277C Page 33