R
3100 Wood Stove Series (ACC)
C.Blower (Optional)
1.Remove the 3 bolts
2.Align holes in mounting flange of blower with bolt holes in appliance. Blower should be positioned at bottom of rear outer skin as shown in Figure 15.1.
3.
4.Place the bracket containing the snap disc and magnet under the bottom left rear corner as shown in Figure 15.1.
See page 29 for detailed operating instructions for the blower and snap disc.
CAUTION
Shock Risk.
•Do NOT remove grounding prong from plug.
•Plug directly into properly grounded 3 prong receptacle.
•Route cord away from appliance.
•Do NOT route cord under or in front of appliance.
Snap Disc Bracket with Magnet
Secure wires with wire tie.
MANUAL
FAN
AUTO
LOW
HIGH
OFF
MANUAL:
AUTO: Fan will turn ON/OFF Automatically by the Snap Disc
Controls the Fan Speed
Figure 15.1
March 2, 2007 | Page 15 |