Quadra-Fire 7008-115 owner manual L.Fixed Glass Assembly, Removing Fixed Glass Assembly

L.Fixed Glass Assembly

Removing Fixed Glass Assembly

WARNING! Risk of Asphyxiation! Handle fixed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.

•DO NOT strike, slam or scratch glass.

•DO NOT operate fireplace with glass removed, cracked, broken or scratched.

•Replace as a complete assembly.

Open lower access panel. Pull out and unhook the two spring latches on the bottom of the appliance that secure the door.

Rotate the door forward approximately 1-1/2 in. (38 mm). Holding the ashlip, lift the door up off of the stationary latches and away from the appliance.

Replacing Fixed Glass Assembly

•Door Frame with Glass Assembly Replacement

Use only Door Assembly replacement, as specified in Section 14 of this manual, available from your dealer, if any glass becomes broken in the Hudson Bay Insert.

Follow the previous instructions to install the door crown and grille to the new Door Assembly.

STATIONARY LATCHES

SPRING LOADED LATCHES

Figure 12.27

Quadra-Fire • HUDBAY-INS • 7008-115 Rev. o • 8/11 35