![REAR BRICK](/images/new-backgrounds/53598/5359865x1.webp)
REAR BRICK
RETAINING TABS
Figure 12.16
Note: For the Hudson Bay Insert the lower brick retainer is used.
J. Positioning the Logs
While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.
Note: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance and reduce sooting.
Complete log installation.
Install the left rear log (#3) over the locator pins in the burner pan.
Figure 12.19
Install the right rear log (#4) over the locator pins in the burner pan.
34
Figure 12.20
Install the right twig (#5) over the locator pins in the right rear log and right front log.
6
Figure 12.17
5
Logs installed in firebox. Logs #1 and #2 are part of the burner pan and are numbered for reference only.
3 | 6 | 5 | 4 |
1 |
|
| 2 |
Figure 12.18
Figure 12.21
Note: Locator pins are included in the log component package.
33 |