Figure 3--- Windows 95 Device Manager
4.Double click the DS-200/300 Enhanced Serial Adapter model name and a properties box should open for the hardware adapter.
5.Click the “Resources” tab located along the top of the properties box. Confirm that the resources Windows 95 has allocated for the DS-200/300 match the hardware configuration. To modify any of the resource settings click the resource name and click the “Change Setting” button. If the “Automatic Settings” option is selected, it will have to be unselected to access the “Change Settings” option. This is accomplished by pointing the mouse at the check next to “Automatic Settings” and clicking on it. Click “Cancel” to exit without making changes.
6.If the “Change Settings” button was selected an Edit Resource window will open up. Inside these Edit Resource windows click on the up/down arrows to the right of the resource value. This scrolls you through all of the allowable resources for your hardware. Pay attention to the Conflict Information at the bottom of the window. Do not select a resource that causes a conflict with any other installed hardware. Click “OK” to save your changes, or “Cancel” to abort.
Quatech Inc. |
