8.To save the settings, hold down SELECT until IK9# 9;II appears. ;N?J?D= appears, then the
ADJUSTING SOUND
Your remote has three alert beep tones.
Tone | Type of Alert |
|
|
|
|
One low tone | Valid key press or touch |
|
|
One high tone | Invalid key press or touch |
|
|
Double low tone | Valid mode key touch |
|
|
Sound is preset to On. Follow these steps to turn sound off or on.
1.Hold down P for at least 3 seconds. 9E:;ý I;J appears.
Note: To exit setup, hold down P for at least 3 sec- onds. ;N?J?D= appears, then the
2.Touch the up arrow. IEKD: appears.
Note: If you scroll past IEKD:, touch the down arrow to return to it.
3.Touch SELECT. ED or E<< appears.
Note: If you change your mind, touch the up or down arrows until you see ED, then continue with Step 4.
4.Touch SELECT. IK99;II appears, then ;N?J?D=, then the
SETTING UP THE REMOTE
Note: If no key is pressed for 60 seconds, the remote control automatically exits setup. ;N?J?D= appears, and the remote returns to the previous mode screen.
1.Find the codes for your device(s) in “Manufacturers’ Codes” on Page 47. On the supplied label, write
Preparation23
