Radio Shack 15-2107 owner manual Touch Screen Keys, Touch Screen Organization

Key	Function
SCAN	Use to preview all available channels
	for a selected device at three-second
	intervals.
	Press again to stop the scan at a
	desired channel.
	To view favorite channels, SCAN must
	be programmed first. See “Program-
	ming Favorite Channel Scan” on
	Page 26.
1M, 2M, or 3M	After programming, use to run a macro.
	See “Programming Macros” on
	Page 28.
P	Use to program advanced features.
	Hold down for three seconds to enter
	the program mode.

THE TOUCH SCREEN KEYS

The remote control features a touch screen organized as a grid of soft keys (keys that change function via soft- ware) and respond to touch commands.

Each time you touch a soft key, a beep sounds, confirm- ing your command. When you touch a device key (TV, VCR/DVD, CAB/SAT, RECVR, AUX 1, AUX 2, AUX 3, or

AUX 4) a double beep sounds. If you touch a key in error, a higher-pitched beep sounds and ?DL7B?: appears. If a pressed key issues an IR signal, the red light blinks and

—flashes.

Note: You can disable the beep (see “Adjusting Sound” on Page 23).

Touch Screen Organization

The touch screen has two groups of keys: Remote Con- trol Function Keys and Mode Keys.

Remote Control Function Keys — Use to remotely control a selected device. The keys function according to the type of device you select and the information dictat- ed by the manufacturer’s code for that device (see “Man- ufacturers’ Codes” on Page 47).

A Quick Look at the Keys 7