Programming Home Theater Macros

The Home Theater mode also includes three exclusive macro keys (SET 1, SET 2, and SET 3). You can store up to 15 keystrokes (including learned keys) on each macro key. For example, you can create a macro that powers on each device in your home theater system with the convenience of a single key touch.

Note: Macros can include learned keys, but not moved keys.

1.Turn off all home entertainment devices.

2.Hold down P for at least 3 seconds. 9E:;ý I;J appears.

3.Touch the down arrow four times. C79HEý A;O appears.

Note: If you scroll past C79HEý A;O, touch the up arrow to return to it.

4.Touch SELECT. I;BýC79HE appears.

5.Press a macro key (SET 1, SET 2, or SET 3). ;DJ C79HE appears. For the example, press SET 1.

Note: Pressing a previously-programmed macro key will overwrite its contents.

6.Press the appropriate keys in the desired order.

For the example, entering the following keys in the below order to program SET 1 to turn on the TV and cable box, then tune the cable to channel 061.

Touch TV. I;BýJEý;D: appears.

Note: I;Bý JEý ;D: prompts you to press SELECT when you reach the end of the macro sequence you are entering.

Press POWER to turn on the TV.

Touch CAB/SAT to select the cable box. Press POWER to turn on the cable box.

32Preparation

Page 32
Image 32
Radio Shack 15-2107 owner manual Programming Home Theater Macros