16-830.fm Page 31 Wednesday, July 21, 1999 9:32 AM
4.Insert a cassette into the camcorder.
5.Press PLAY on the camcorder to play the tape to the point where you want audio/ video dubbing to end. Then press REC/ PAUSE to pause it.
6.Press DISPLAY. M appears in the view- finder next to the tape counter. Then press RESET to reset the tape counter to 0000.
7.Press REWIND to rewind the tape past the point where you want to start audio/video dubbing, then press PLAY. When you see the point of the tape where you want to start audio/video dubbing, press REC/
PAUSE.
8.Press PLAY and DUBBING AUDIO/VIDEO
together twice. and the picture you are dubbing appear in the viewfinder.
Note: If you accidentally press PLAY and together only
once, appears in the viewfinder instead. If this happens, simply press PLAY and DUBBING AUDIO/VIDEO together again.
9.Press REC/PAUSE on the camcorder. Audio/video dubbing begins.
When the tape counter shows 0000, the camcorder automatically stops the tape, and video and audio dubbing stop.
Notes:
•To protect the tape and conserve battery power, the camcorder automatically stops and turns itself off if left in the record/pause mode for more than 5 min- utes.
•To prevent feedback squeals, turn down the volume control on any TV or TV/ monitor connected to the camcorder.
10.Press STOP/EJECT on the camcorder to stop audio/video dubbing at any time.
31
