16-830.fm Page 39 Wednesday, July 21, 1999 9:32 AM

Do not use the camcorder on its side. The tape might not wind properly and might jam.

Some small, portable tripods might be diffi- cult to connect and might not be sturdy enough to support your camcorder. Be sure to use only a strong, stable tripod.

SERVICING YOUR

CAMCORDER

Except as noted in this owner’s manual, there are no user-serviceable parts inside your cam- corder. If you encounter a problem that you can- not correct using this owner’s manual and its troubleshooting guide or the sections below, take the camcorder to your local Radio Shack store for assistance.

To clean the camcorder’s lens and optical elements, use air blowers and lens papers designed for photographic lenses.

To clean the picture tube face and lens inside the eyepiece, press and hold down the cover’s tab on the back of the eyepiece, then open the cover.

though the audio signal is clear. Head cleaning must be done by an experienced camcorder technician. If the camcorder’s heads become dirty, contact your local Radio Shack store for assistance.

ERASE PROTECTION

Video cassettes have an erase-protection tab to prevent accidental erasure of a tape. If the erase-protection tab is missing, the camcorder cannot record on the tape.

If you try to record on a tape with the erase-pro- tection tab missing, TAPE appears in the view- finder.

If you want to record on a video cassette that has had its tab removed, put a piece of heavy plastic tape over the erase-protection tab hole.

Caution: The eyepiece’s cover is not remov- able. Do not try to remove it from the eyepiece.

Clean the picture tube face and lens using a soft non-abrasive cloth, swab, or lens cleaning pa- per. When you finish cleaning, close the cover.

CLEANING THE VIDEO HEADS

The camcorder’s video heads require cleaning from time to time. Dirty video heads can cause the playback picture to become blurred even

STORING YOUR VIDEO

CASSETTES

Eject and store the cassette when you finish us- ing it. This helps protect the cassette and the camcorder’s internal mechanisms from dust.

Place your video cassettes in their protective boxes and store them in a cool, dry, dust-free environment. Store the cassettes on end, not on their sides. This prevents improper settling of the cassette’s spools.

Note: Tape can become wound too tightly around the cassette’s spools after numerous re- cordings and playbacks. This can cause the cassette to improperly load when you insert it.

39

Page 39
Image 39
Radio Shack 16-830 Servicing Your Camcorder, Erase Protection, Cleaning the Video Heads, Storing Your Video Cassettes